Information Gauge Display - Invacare Pronto M50 Service Manual
Invacare pronto series power wheelchair service manual
Hide thumbs
Also See for Pronto M50:
- Parts catalog (100 pages) ,
- Owner's manual (96 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
SECTION 4—WHEELCHAIR OPERATION
Information Gauge Display
Located on the front of the joystick housing, it provides the following information to the
user on the status of the wheelchair -
1. Power is On.
2. True state-of-battery-charge, including notification of when the battery requires
charging:
A. GREEN LED is lit, indicating well charged batteries.
B. Only AMBER LEDs are lit, indicating batteries are moderately charged. Recharge
batteries before taking a long trip.
C. Only RED LED is lit, indicating batteries are running out of charge. Recharge
batteries as soon as possible.
The Information Gauge display also serves as a system diagnostic device when a fault is
detected by the control module. A specific number of flashes of the LEDs indicate the type
of fault detected. Refer to SPJ Information Gauge Display Diagnostics on page 22.
Pronto® Series
40
Part No. 1125075
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
