Invacare Pronto M50 Service Manual page 38

SECTION 4—WHEELCHAIR OPERATION
NOTE: For this procedure, refer to FIGURE 4.8.
NOTE: This procedure applies to M61 wheelchairs only.
1. Make sure the wheelchair is on a level surface.
2. Press the mode button to switch from driving mode to elevate mode.
NOTE: The LED will light up with a circle around it.
3. Move the joystick:
• Forward - Elevates the seat.
• Backward - Lowers the seat.
Elevated Seat
Pronto® Series
FIGURE 4.8 Elevating the Seat
38
Selected
Drive
Mode
Joystick
Mode
Button
Elevate
the Seat
Lower
the Seat
Part No. 1125075