Recommended Tools; Reference Documents - Invacare Pronto M50 Service Manual

RECOMMENDED TOOLS

A QUALIFIED TECHNICIAN MUST PERFORM ALL PROCEDURES
IN THIS SERVICE MANUAL.
DEALERS AND QUALIFIED TECHNICIANS: DO NOT SERVICE OR
OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND
UNDERSTANDING (1) THE OWNER'S OPERATOR AND
MAINTENANCE MANUAL, (2) THE SERVICE MANUAL (IF
APPLICABLE) AND (3) THE SEATING SYSTEM'S MANUAL (IF
APPLICABLE). IF YOU ARE UNABLE TO UNDERSTAND THE
WARNINGS, CAUTIONS AND INSTRUCTIONS, CONTACT
INVACARE TECHNICAL SUPPORT BEFORE ATTEMPTING TO
SERVICE OR OPERATE THIS EQUIPMENT. OTHERWISE, INJURY
OR DAMAGE MAY RESULT.
RECOMMENDED TOOLS
The following tools are recommended for servicing this wheelchair:
• Invacare Power Mobility Field Service Kit - p/n 1125222
• 5mm ball head 10-inch t-handle allen wrench
• Flat tip screwdriver
• ½-inch deep socket and 3/8-inch ratchet
• Small and Medium Phillips
• Needle nose pliers
• Wire cutters
• Tie-wrap assortment
• Dead blow hammer
• ¼-inch to ½-inch wrenches

REFERENCE DOCUMENTS

M50/51/61 Owner's Manual
MK5™NX™Electronics Manual
Quad-Link Instruction Sheet (for assemblies after 4/6/06)
MK6i™Field Reference Guide
MK6i Service Manual
NOTE: Updated versions of this manual are available on www.invacare.com.
Pronto® Series
WARNING
screwdriver
®
DOCUMENT
1125085
1110532
1134844
1141471
1143203
2
PART NUMBER
Part No. 1125075