Section 1-Troubleshooting A N D M A I N T E N A N C E; Troubleshooting; Type Of Tools Or Equipment Needed To Repair And Service The Wheelchair; Authorized Parts To Be Replaced - Invacare Action 2 Basic Service Manual

Table of Contents

SECTION 1— MAINTENANCE GUIDELINES & STABILITY WARNING

S E C T I O N 1 — T R O U B L E S H O O T I N G

A N D M A I N T E N A N C E G U I D E L I N E S

NOTE: Twice a year, take your wheelchair to a qualified dealer for a thorough inspection

and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth

operation of your wheelchair. To operate properly and safely, your wheelchair must be

cared for just like any other vehicle. Routine maintenance will extend the life and

efficiency of your wheelchair. Initially and at least every six months, follow these

maintenance procedures:

Type of tools or equipment needed to repair and

service the wheelchair (as minimum):

Flat hexa wrench (#10, #13, #19...)

Hexagon socket (#19...)

Allen wrench (#2.5, #4, #5...)

Philips (#2...)

Pozidriv (#2...)

Torx (T20, T25...)

Authorized parts to be replaced are listed on spare part catalogue (website) under Action 2

Basic section. Only Invacare part are allowed to be placed or replaced on devices.

Table of Contents

Need help?

Do you have a question about the Action 2 Basic and is the answer not in the manual?