Call Forward On Number; Call Forward Off Number - Bosch Solution 16i User Manual

3. Using the numeric keys, enter all of the digits of the
first telephone number the panel should call. You
must enter the complete number including area
codes etc.
You can change a single digit by scrolling the cursor
left [←] and right [→]. For special characters
(eg. Pause = P, A = *, H = # etc), use the [↑] and [↓]
keys.
To clear or delete all numbers from the current
cursor position to the right, press the [OFF] key.
4. Press [OK] to program telephone number 2.
5. Using the numeric keys, enter all of the digits of the
second telephone number (if required).
6. Press [OK] to program telephone number 3.
7. Using the numeric keys, enter all the digits of the
third telephone number (if required).
8. Press [OK] to save and exit, or press [MENU] to
cancel.
Domestic reporting must be enabled by your
i
installer or this location will not be available.
Note
Comms > Commands >

Call Forward On Number

When you leave your premises, you no longer need to
remember to manually activate the Call Forward On feature
via the telephone. This option allows you to program
the Call Forward On sequence that the control panel will
automatically use when you turn Area 1 'On' .
In Australia, a typical sequence for activating the Call-
Forward On – After Time (All Calls) is described below:
For other countries please substitute the appropriate
commands after consultaion with your telephone company.
1. Enter [Master PIN] + [MENU]
2. Enter [5] + [1] + [6] + [OK). The keypad will display
the current call forward on number sequence.
3. The default sequence A61PA20H is explained
below. You should modify this sequence to suit
your particular requirements or ask your installer to
configure for you.
Bosch Security Systems 10/07 BLCC500U FTR1.01
Ph1 ?
Ph2 ?
ph3 ?
CfOnPh
MENU 5-1-6
A) *61 (To turn Call Forward On – After Time).
B) Telephone number that you want calls to go to
(e.g. 0416123456).
C) *5# (End of Call Forward sequence after 5
seconds).
Therefore, you would program the above steps
as follows: *610416123456*5#.
4. Using the numeric keys, enter all the digits of the
call forward on sequence.
You can change a single digit by scrolling the cursor
left [←] and right [→]. For special characters (eg. , =
pause * or # etc), use the [↑] and [↓] keys.
5. Press [OK] to save and exit, or press [MENU] to exit
without saving.
For more information on how to use the Call
i
Fowarding features contact your telephone service
Note
provider or your installer.
When programming telephone numbers the
following symbols have a special meaning or
function. A = *
H = #
P = Pause (2 second)
Comms > Commands >
Call Forward Off Number
When you enter your premises, you no longer need to
remember to manually disable the Call Forward feature
via the telephone. This option allows you to program
the Call Forward Off sequence that the control panel will
automatically use when you turn Area 1 'Off' .
In Australia, a typical sequence of activating the Call
Forward Off feature is described below:
For other countries please substitute the appropriate
commands after consultaion with your telephone company.
1. Enter [Master PIN] + [MENU]
2. Enter [5] + [1] + [7] + [OK]. The keypad will display
the current call forward off number sequence.
3. The default sequence H61H is explained below. You
should modify this sequence to suit your particular
requirements or ask your installer to configure for
you.
A) #61 (To turn Call Forward Off- After Time).
B) # (End of Call-Forward sequence)
Therefore, you would program the above steps as follows:
#61#
Solution16 User Guide
i
A61PA2
CfOfPh
MENU 5-1-7
H61H
23