Table of Contents
Advertisement
Operation
Loss of Signal Setting
Static Color
Auto Programs
Edit Custom
Programs
Strobe Personality
Battery Life
-14-
This setting controls how the product will respond when the DMX signal is lost.
1. Go to the SET main level, and select DERR.
a. Select SAVE to make the product use the last command used when the signal
is lost.
b. Select BLAK to turn off the all the LEDs when the signal is lost.
The Static Color mode allows for permanent RGBA color mixing without a DMX
controller.
1. Go to the STAT main level.
2. Select the desired color (RED, GREN, BLUE, or AMBR).
3. Select the desired color value (000~255).
4. Repeat the steps for additional colors.
5. Select STRB.
6. Select the desired frequency (00~20).
Auto programs allow for dynamic RGBA color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AT. 01~10) or custom program (PR. 01~10).
3. Select the desired speed at which the chosen program will run (P. 000~255).
You cannot edit any of the auto programs (AUTO 01~10).
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the EDIT main level.
2. Select the desired auto program (PR. 01~10).
3. Select the desired scene (SC. 01~30).
4. Select the desired color or effect (RED, GREN, BLUE, AMBR, STRB, TIME, or
FADE).
5. Select the color or effect value (000~255 for colors and timers, or 00~20 for strobe).
6. Repeat the steps for additional colors or effects.
7. Return to the scene level (SC. 01~30).
8. Repeat the settings of colors and effects for the other scenes.
This setting allows you to select the CLASSIC (01~20 Hz) strobe or SPECIAL
(Random/Slow/Fast) strobe personalities.
1. Go to the SET main level.
2. Select a strobe personality (SPEC or CLAS).
This setting allows the user to select the output intensity for a given runtime (battery life).
1. Go to SET.
2. Select LIFE.
3. Select a battery life (ECON or LONG).
WELL™ Quad-M User Manual
Advertisement
Table of Contents
