DMX Values
STD.P
Channel
Function
1
Dimmer
2
Fine Dimmer
3
Strobe
4
Zoom
Zoom Motor
5
Reset
DOS
Channel
Function
1
Dimmer
2
Fine Dimmer
UNO
Channel
Function
1
Dimmer
Loss of Signal Setting
This setting controls how the product responds when the DMX signal is lost.
1.
Go to the SETTING main level
2.
Select DMX ERROR.
3.
Choose BLACK to turn off the LEDs when the signal is lost or SAVE to use the last command
programmed when the signal is lost.
Dimmer Control
The Ovation FD-205WW may be plugged into and controlled using a regular dimmer or by being plugged
into constant power and using DMX control. By default the product is set to SENS which automatically
senses the type of power/control being used and sets the product to react accordingly. The product may
also be set to DMMR mode which turns off the DMX control and only allows exclusive control of the
product via the dimmer.
1.
Go to the RUN MODE main level.
2.
Choose DMMR or SENS.
When SENS and DMMR modes are active, the only control panel button that will
work will be the <ENTER> button which will allow you to change modes.
Dimmer - Menu Control
To adjust the light output of the Ovation FD-205WW, select the dimmer setting as follows:
1.
Go to the STATIC main level.
2.
Select DIMMER.
3.
Choose the desired dimmer setting 000–100 (0–100% light output)
Page 14 of 22
Value
000
255
0-100%
000
255
Fine control (16-bit)
000
009
No function
010
099
Slow to fast
100
109
No function
110
179
Lightning effect from slow to fast
180
189
No function
190
255
Random effect from slow to fast
000
255
Narrow-wide
000
200
No function
201
220
Zoom motor reset
221
255
No function
Value
000
255
0-100%
000
255
Fine control (16-bit)
Value
000
255
0-100%
Percent/Setting
Percent/Setting
Percent/Setting
Ovation FD-205WW User Manual Rev. 1
O
PERATION