Chapter 11 Binding Table Commands; Binding-Table User-Bind - TP-Link JetStream L2 Lite TL-SG3210 Cli Reference Manual

Chapter 11 Binding Table Commands

You can bind the IP address, MAC address, VLAN and the connected Port number of the Host
together, which can be the condition for the ARP Inspection to filter the packets.

binding-table user-bind

Description
The binding-table user-bind command is used to bind the IP address, MAC
address, VLAN ID and the Port number together manually. You can manually
bind the IP address, MAC address, VLAN ID and the Port number together in
the condition that you have got the related information of the Hosts in the LAN.
Syntax
binding-table user-bind hostname
port-num {none | arp-detection}
Parameter
hostname ——The Host Name, which contains 20 characters at most.
ip-addr —— The IP Address of the Host.
mac-addr —— The MAC Address of the Host.
vid ——The VLAN ID neened to be bound, ranging from 1 to 4094.
port-num —— The number of port connected to the Host.
{none | arp-detection}——Disable or Enable ARP detection for the entry.
Command Mode
Global Configuration Mode
Example
Bind an ACL entry with the IP is 192.168.0.1, MAC is 00:00:00:00:00:01, VLAN
ID is 2 and the Port number is 5 manually. Andthen enable the entry for the ARP
detection.:
TP-LINK(config)#
00:00:00:00:00:01 vlan 2 port 5 arp-detection
ip-addr
binding-table user-bind
49
mac-addr vlan vid
host1 192.168.0.1
port