Table of Contents
Advertisement
NTI Manual Ethernet Switch
TROUBLESHOOTING
Each and every piece of every product produced by Network Technologies Inc is 100% tested to exacting specifications. We
make every effort to insure trouble-free installation and operation of our products. If problems are encountered while installing
this product, please look over the troubleshooting chart below. If an answer is not found in the chart, check the FAQs (Frequently
Asked Questions) at our website at
& Canada or 330-562-7070 (worldwide).
Problem
ETH-4X1 power LED does not
illuminate
NETWORKS(s) will not
communicate with DEVICE(s)
MODEL :
ETH-4X1
ETH-2X1
ETH-4X1-RS
ETH-2X1-RS
SERIAL NO:
DATE: __
INSPECTED BY:
http://www.nti1.com
or contact NTI directly for help at 800-742-8324 (800-RGB-TECH) in US
We will be happy to assist in any way we can.
Cause
•
Power supply is not connected
or plugged-in.
•
Poor Connection
•
Wrong ethernet cable
8
Solution
•
Make sure outlet is live and AC adapter is
plugged in. Also make sure power jack is
fully connected to the switch.
•
Make sure all ethernet cables are inserted
completely, snapping into RJ45 sockets
•
Cable must be CAT 5 ethernet- straight
through type, NOT crossed
Man048 Rev. 1/13/05
Advertisement
Table of Contents
Need help?
Do you have a question about the ETH-4X1 and is the answer not in the manual?