Technical Specifications; Troubleshooting; Warranty Information - NTI KEEMUX-Sx-O Installation And User Manual

Sun kvm switch
Table of Contents

Advertisement

Technical Specifications:

Mating face of a MALE
6

TROUBLESHOOTING

1.
Verify that all cables are securely connected.
2.
Verify that the computer is connected to a Keyboard port and Video port with the same port number.
3.
If the cable from a computer's Keyboard port is disconnected from the NTI Switch while power is on, turn the power OFF to
the computer before plugging the cable back in.
4.
Verify port 1 LED illuminates when switch is turned ON. If it doesn't, call NTI for assistance.
5.
If a SUN SPARC-10 will not power up, connect to the SPARC through the switch and press the "POWER" key (only available
on type 5 and 5C keyboards).
6.
Turn ON power to NTI Switch first, then to the computers.
NOTE: A
LWAYS TURN POWER ON IN THIS SEQUENCE

WARRANTY INFORMATION

The warranty period on this product (parts and labor) is one (1) year from the date of purchase. Please contact Network
Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.nti1.com for
information regarding repairs and / or returns. A return authorization number is required for all repairs/returns.
COPYRIGHT
Copyright © 2001 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, OH 44202
CHANGES
The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the
right to make changes in the product design without reservation and without notification to its users.
SERIAL NO.:
KEEMUX-S-___
DATE:
INSPECTED BY:
8 Mini DIN
Keyboard/Mouse
PIN #
SIGNAL
1
Ground
2
Ground
3
+5V
4
Mouse
5
Kybd Receive
6
Kybd Transmit
7
Pwr N
8
+5V
8mD Connector
7
8
3
4
5
2
1
.
13W3 Monitor
PIN #
SIGNAL
PIN #
1
Ground
9
2
V sync
10
3
ID 2
A1
4
Ground
A2
5
C sync
A3
6
H sync
7
Ground
8
ID 1
Mating face of a MALE
13W3 Connector
1
2
3
4
9
6
7
10
8
10
SIGNAL
ID 0
Ground
Red
Green
Blue
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Keemux-sx

Table of Contents