Installing The Drivers; Installing The Twain Scanner Driver; Installing The Isis Scanner Driver - Bell and Howell 500 FB Operator's Manual

SETTING UP THE SCANNER
You must intall the scanner driver software on the host computer before you can
use the scanner.

Installing the TWAIN Scanner Driver

Follow these steps to install the TWAIN scanner driver on your Windows 3.1,
Windows 95, and Windows NT system:
1
Insert the "TWAIN Scanner Driver for Windows" diskette into the 3.5
inch disk drive on your host computer.
2
Close any applications that are currently running.
3
From the Run window type "a:\ (or the letter that represents the
drive in which you placed the installation diskette) setup.exe".
4
Click [OK] and follow the installation instructions that display on the
screen.

Installing the ISIS Scanner Driver

Follow these steps to install the ISIS scanner driver on your Windows 3.1,
Windows 95, and Windows NT system:
1
Insert the "ISIS Scanner Driver for Windows" diskette into the 3.5
inch disk drive on your host computer.
2
Close any applications that are currently running.
3
From the run window type "a:\ (or the letter that represents the drive
in which you placed the installation diskette) setup.exe".
4
Click [ OK ] and follow the installation instructions that display on the
screen.
1-14

INSTALLING THE DRIVERS