Table of Contents
Advertisement
Page 10
Note
S1D13700
X42A-G-002-01
JP1 - HIOVDD
JP1 can be used to measure the current consumption of the S1D13700 host interface.
When the jumper is at position 1-2, normal operation is selected.
When no jumper is installed, host interface current consumption can be measured across
JP1.
The HIOVDD voltage can be selected to be +3.3V or +5V using jumper JP7.
Top View
Figure 3-2: Configuration Jumper JP1 Location
JP1
Normal Operation
S5U13700B00C Rev. 1.0 Evaluation Board User Manual
Revision 1.0
Epson Research and Development
Vancouver Design Center
HIOVDD current
measurement
Issue Date: 2005/07/15
Advertisement
Table of Contents
