Using Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call
from any telephone. Using Call Park does not tie up a line. When
configured network-wide, Call Park can be used across networks. A
System Park extension can be configured to automatically park most
calls.
To park a call on the System Park DN or your own DN:
Park
To park a call on a DN other than the System Park DN or your own
DN:
Park
Park
During an active call, press the
key twice.
Note: By default, the call is parked on
Park
your DN unless a
enabled to automatically park calls on
the system.
1. Press the
2. Dial the DN where you want to park the
call.
3. Press the
While on an active call
System Park DN
Park
soft key.
Park
soft key.
Park
soft
is
79