Conferencing; Call Park / Unpark - Nortel 1210 User Manual

Conferencing

Conference feature allows more than two phones to converse with each other at
the same time. Conference can be done in one of two ways: up to 3-way
conferencing performed natively on the telephone, or n-way conferencing using a
conferencing server.
• Three-way conferencing natively on the phone: When you are in a call,
press Flash softkey and make another call. Now you have two ongoing
calls on the same line. Press Conf softkey. This brings all three phones
into conference.
• N-way Conferencing using a conference server:
conference server configured on your phone, pressing the Conf softkey
uses the services of the conference server. If you are in one active call
and press Conf key, the active call will be transferred to the server, and
you may dial another party if you wish to bring the other party into the
conference.
Note:
The line key icon of your phone changes to
conference.

Call Park / Unpark

With this feature you can park a call on a call-park server, and retrieve it back at
some other phone. To do this, follow the steps explained below:
Parking Call: While in a call, press Park Softkey. This places the other phone
on hold. Now enter a number of a park orbit out of the ones that are available on
the server for parking a call and press Dial Softkey.
Unpark Call: A user at some other phone may retrieve a parked call by pressing
the Unpark Softkey and then entering the park retrieve orbit number.
OPERATION
Parking A Call
Retrieving A Call
PROCEDURE
Park softkey > enter orbit server number > Dial
Unpark softkey > enter orbit number > Dial
If you have a
, on going to
IP Phone 1200 SIP User Guide
49