Connecting The Components - Nortel 1120E User Manual

Connecting the components

Connecting the components
Figure 4 on page 26 shows connections on the IP Phone 1120E.
Figure 4: IP Phone 1120E connections
Expansion module port*
USB connector
WARNING *Ensure that the protective rubber cap on
the Expansion Module port is in place when the port is
not in use. Connecting anything other than the proper
Expansion Module connector to this port can cause
damage to the phone.
26
PC Ethernet port
LAN Ethernet port
Tilt lever
Link lamp
AC adapter jack
Headset jack
Handset jack