Nortel 1120E User Manual page 14

About the Nortel IP Phone 1120E
Z
GrpCl
(Volume +)
(Volume -)
(Mute)
14
The keys on either side of the LCD display
user-defined feature
area are
labels on the LCD. These keys also function
line (DN)
as keys.
A steady LCD light beside a line (DN) key
indicates that the line is active. A flashing
LCD light indicates the line is on hold or the
feature is being programmed.
A steady LCD light beside a feature key
indicates that the feature is active. A flashing
LCD light indicates that the feature is being
programmed.
Volume control
Use the
the volume of the ringer, handset, headset,
speaker, and the Handsfree feature. Press
the top button to increase the volume, and
press the bottom button to decrease volume.
Mute
Press the key to listen to the receiving
party without transmitting. Press the
key again to return to two-way conversation.
Mute
The key applies to handsfree, handset,
and headset microphones.
Note: The Mute LED indicator, located
Mute
on the key, flashes to indicate that
the microphone is muted.
keys, with
buttons to adjust
Mute