HP KAYAK XU800 Troubleshooting Manual page 34

WARNING
Configuration Problems
If the PC Workstation Clock Is Not Keeping Time Correctly
If the PC Workstation Clock Is Not
Keeping Time Correctly
There is a danger of explosion if the battery is incorrectly installed. For
your safety, never attempt to recharge, disassemble, or burn the old
battery. Replace the battery only with the same or equivalent type
recommended by the manufacturer. The battery is a lithium battery
which does not contain heavy metals. Nevertheless, in order to protect
the environment, do not dispose of batteries in household waste.
Please return used batteries to the shop from which you bought them,
to the dealer from whom you purchased your PC Workstation, or to
HP, so that they can be either recycled or disposed of in an
environmentally sound way. Returned batteries will be accepted free
of charge.
If your PC Workstation repeatedly loses its configuration settings you
should consider changing the battery. Replace it with a CR2032 coin
type manganese/lithium battery, available from most PC Workstation
stores.
To change the battery:
1 Disconnect the PC Workstation's power supply cord and any
connection to a telecommunications network.
2 Remove the PC Workstation's cover.
3 Remove the old battery by sliding it from under the retaining clip.
4 Place the new battery in the battery holder and ensure that it is
properly seated. Ensure that the clip holds the battery firmly in
place.
5 Replace the cover. Reconnect all cables and power cords.
6 Run the Setup program, accessed by pressing
reconfigure the PC Workstation.
34
at startup, to
F2