Refer To - HP KAYAK XU800 Troubleshooting Manual

Your PC Workstation Does Not Start Correctly
Case 4 — Boot Process Fails
Number
of Beeps
5 Processor test error.
6 Input/Output (I/O) error.
7 The processor on the system board
generated an error.
8 The system video card is either missing or
faulty.
9 The BIOS Checksum value does not match
the value encoded in the BIOS.
10 The CMOS RAM has failed.
11 The cache memory test failed.
18
Description Action to Take...
Check that:
•
Processor is correctly installed.
•
Termination card installed in processor slot 2 in
a single processor system.
•
Refer to page 13 for further actions to take.
If the error still occurs, replace:
1 Processor.
2 system board.
•
Keyboard is connected.
•
PCI card is installed correctly.
•
Termination card installed in processor slot 2 in
a single processor system.
•
Refer to page 13 for further actions to take.
If the error still occurs, replace the system board.
This is not a fatal error. Check that the video card
is correctly installed and cabled. If missing, install
the video card. If the error still occurs, replace it
with a known working video card.
Perform the following actions in this order:
1 Press to enter the Setup program, then
F2
to load the default BIOS settings.
F9
2 Clear the CMOS. Refer to page 37 for
instructions.
3 Flash the BIOS. Refer to page 36 for
instructions on how to update the BIOS.
If the error still occurs, replace the system board.
Perform the following actions in this order:
1 Press to enter the Setup program, then
F2
to load the default BIOS settings.
F9
2 Clear the CMOS. Refer to page 37 for
instructions.
3 Flash the BIOS. Refer to page 36 for
instructions on how to update the BIOS.
If the error still occurs, replace the system board.
Replace the processor(s).