Figure 3-4. Rf And If Switching With Four Test Sets; Table 3-5. Coaxial Switch Settings For Figure 3-4, Above - HP 8517B Operating & Service Manual

Figure 3-4 RF and IF Switching with Four Test Sets
Table 3-5 Coaxial Switch Settings for Figure 3-4, Above
New ADDRESS Test Set Selected
1, 2, 3
of Test Set
20 1
21 2
22 3
23 4
1. Not all system connections are shown.
2. In dual source configurations, the second source can be multiplexed in a similar manner.
3. If only one dual source test set is used, the second source can be directly connected to the
appropriate test set.
1, 2, 3
Coaxial Port Selected
with Switch #1
Port 1
Port 1
Port 2
Port 2
HP 8517B S-Parameter Test Set Manual 3-7
Coaxial Port Selected
with Switch #2
Port 1
Port 2
Port 1
Port 2