Figure 3-3. Rf And If Switching With Two Test Sets; Table 3-3. Rf And If Switch Settings In Figure 3-3, Above - HP 8517B Operating & Service Manual

Figure 3-3 RF and IF Switching with Two Test Sets
Table 3-3 RF and IF Switch Settings in Figure 3-3, Above
New ADDRESS of
1, 2
Test Set
20
21
1. Not all system connections are illustrated.
2. In dual source configurations, the second source may be multiplexed in a similar manner. If only one
dual source test set is used, the second source may be connected directly to the appropriate test
set.
Test Set Number Coaxial Switch Port Selected
Selected
Number 1 Port 1
Number 2 Port 2
HP 8517B S-Parameter Test Set Manual 3-4