Table of Contents
Advertisement
Parallel SCSI Configuration
In the Configuration Menu, choose 4) Parallel SCSI Configuration to configure
the SCSI buses. The Parallel SCSI Configuration Menu allows the configuration
of the SCSI discovery mode, SCSI bus reset, termination mode, tape backup
settings, and default current map.
Figure 43
Figure 43: SCSI Configuration menu
Current settings for the selected SCSI bus are displayed.
Network Storage Router e1200-160
is an illustration of the Parallel SCSI Configuration Menu.
Caution:
If these configuration settings are incorrectly set, processing
difficulties may occur. Before changing these settings, evaluate the need for
the change and verify the desired setting. HP recommends backing up the
router configuration to an external file before making changes to these
settings.
Serial/Telnet User Interface
105
Advertisement
Table of Contents
Troubleshooting
