HP StorageWorks e1200-160 User Manual page 59

Note:
Fabric, the unit may receive Framing errors due to the incorrect Fibre Channel link
speed.
Network Storage Router e1200-160
Performance Mode (default: 2 Gb/s) toggles between 1 Gb/s and 2 Gb/s.
If Performance Mode is set incorrectly and the router is plugged into a Loop or
Override Settings (service mode-restricted access) enhances interoperability
with some storage devices that require special consideration during setup of
the router configuration menus.
— Hi-Sup Bit toggles between Set and Clear.
— Force FCP Response Code toggles between Off and On for support of
HP-specific HBA #223180-B21 and #120186-001.
— Initiator Bit toggles between Set and Clear.
When using the router in a router-to-router configuration, this option
should be configured to Set. A router-to-router configuration is a type of
configuration where one router appears as a target to another initiator
router.
— Link Garbage Deletion toggles between Enabled and Disabled.
Visual Manager User Interface
59