Visual Manager User Interface
Port Configuration - Ethernet Settings (Service Mode - Restricted Access)
To change the Ethernet configuration settings, select the Ethernet port icon. The
Ethernet Configuration dialog box is displayed.
See
Figure 14: Ethernet Configuration dialog box
Ethernet configuration settings:
48
Figure 14
for an example of the Ethernet Configuration dialog box.
Ethernet Mode can be set to one of the following options:
— 10Mps Only
— 100Mps (half duplex) Only
— 100Mps (full duplex) Only
— 10/100Mps (Auto-Neg.)
MAC address is the Ethernet physical address of the router.
Caution:
If this configuration is incorrectly set, processing difficulties may occur.
Before changing this setting, evaluate the need for the change and verify the
desired setting. HP recommends backing up the router configuration to an
external file before making changes to this setting.
Network Storage Router e1200-160