HP StorageWorks e1200-160 User Manual page 99

To view or change configuration settings:
1. Select a menu option
2. Make the configuration changes
3. Select X) Return to previous menu
4. Select A) Save Configuration to record the changes.
Ethernet Configuration Menu options:
Network Storage Router e1200-160
1) Change IP address (default: 1.1.1.1) changes the router IP address.
2) Change IP Subnet Mask (default: 255.255.255.0) changes the router
Subnet mask.
3) Change IP Gateway (default: 0.0.0.0) changes the IP gateway for the
Ethernet network.
4) Change Ethernet Physical Address changes the Ethernet physical
address (MAC address).
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
The manufacturer always assigns Ethernet physical addresses to the Ethernet
adapters.
5) Toggle Ethernet Mode changes the Ethernet mode.
Options include:
— 10 Mb/s only
— 100 Mb/s (half duplex) only
— 100 Mb/s (full duplex) only
— 10/100 MPS (Auto-Neg.)
6) Change Hostname changes the name of the host server.
The name can be any combination of alphanumeric characters, up to eight
characters.
Serial/Telnet User Interface
99