HP StorageWorks e1200-160 User Manual page 116

Serial/Telnet User Interface
Figure 52
Channel map.
Figure 52: Creating a map entry for a Fibre Channel map
Note:
entered. The Target ID must already be defined in the SCSI configuration.
Creating an Entry for a SCSI Map
To pre-enter a map entry for devices that are not yet online, select Create (C).
Note:
A series of questions is displayed. The questions will vary based on the "Current"
map protocol. Required information includes the Target ID and LUN address,
protocol, port, device name, and device type must be entered.
Figure 53
map.
116
is an example of the screen display when creating an entry for a Fibre
If the device being added is a SCSI device, the Target ID and LUN ID must be
All essential information about the device must be known.
is an example of the screen display when creating an entry for a SCSI
Network Storage Router e1200-160