Page of 4

HP e1200-160 Quick Start Manual

Network storage router.
Hide thumbs
   
hp
StorageWorks
Caution: Parts can be damaged by electrostatic
discharge. Keep parts in their containers until
needed. Ensure you are properly grounded
when touching static-sensitive components.
Caution: This part is not hot-pluggable. Power
down the library before replacing this part.
1
Inspect the contents of the kit.
• Network Storage Router (NSR) e1200-160
• Documentation CD
• Serial cable
• Two SCSI cables, 0.5 m VHDCI-VHDCI
Note: Save the containers and packing
materials for any future reshipment.
Note: If you are replacing a router,
save the configurations settings using
the FTP User Interface.
[ftp – > login – > bin – >
get *.cfg .cfg]
Refer to the HP StorageWorks Network
Storage Router User Guide for more
information.
Network
Storage Router
e1200-160
Note: Depending on the model, your
library may look different from those
illustrated in this procedure.
2
Identify the NSR components.
1. Power LED
2. Serial RJ-11 connector
3. Ethernet RJ-45 connector
4. FC Activity LED
5. FC link LED
6. Fibre Channel port
7. SCSI bus activity LED
8. SCSI bus activity LED
9. SCSI VHDCI connector (2)
Installation
3
Using the GUI,
turn the library
off. Turn off the
Menu
master power
Offline
switch for each
power supply at
Status
the back
of the library,
Power
and then
remove the AC power cord.
Note: This process automatically moves
the robot to the parked position.
1
2
3
4
5
6
8
7
9
Mail Slot
Magazine
Move
Access
Access
Media
hp StorageWorks
MSL6000 series library

Advertising

   Related Manuals for HP e1200-160

   Summary of Contents for HP e1200-160

  • Page 1

    1. Power LED 2. Serial RJ-11 connector 3. Ethernet RJ-45 connector Inspect the contents of the kit. 4. FC Activity LED • Network Storage Router (NSR) e1200-160 5. FC link LED • Documentation CD 6. Fibre Channel port • Serial cable 7.

  • Page 2

    Using a #1 Phillips screwdriver, remove the center option slot cover plate. If replacing an existing router, remove the router. Caution: To avoid damage to the library, ensure routers are installed in the correct option slots. If you are installing one router, place it in the middle slot next to the controller Remove the SCSI interface cable, the SCSI board.

  • Page 3

    Configuration Refer to the HP StorageWorks Network Storage Router User Guide for detailed procedures on configuring the router. Note: If this router replaced a faulty router, restore the old router's configuration settings using the FTP User Interface [ftp – > login – > bin – > put <path><filename>.cfg].

  • Page 4

    © Copyright 2003 Hewlett-Packard Development Company, L.P. Third Edition (September 2003) Part Number: 289157-003 *289157-003* 289157-003...

Comments to this Manuals

Symbols: 0
Latest comments: