Configuration Menu - HP StorageWorks e1200-160 User Manual

Serial/Telnet User Interface

Configuration Menu

The Configuration Menu is used to configure the router.
Figure 39
Figure 39: Configuration menu
Note:
for most system environments. Few changes to the configuration should be necessary.
After any configuration changes are made, select A) Save Configuration to record the
changes.
If the configuration has been modified to meet company-specific needs, back up the
company-specific configuration to an external file. If necessary, these settings can later
be restored to the router.
Configuration Menu options:
96
is an illustration of the Configuration Menu.
The router is shipped with a configuration of default settings that is acceptable
1) Baud Rate Configuration changes the baud rate on the serial port.
2) Ethernet and SNMP (SNMP not supported)
Ethernet network settings.
3) Fibre Channel Configuration configures the settings for the Fibre
Channel port.
4) Parallel SCSI Configuration configures the settings for the SCSI buses.
Configuration enters
Network Storage Router e1200-160