Table of Contents
Advertisement
Figure 2–28: Configure E-Mail dialog box
a. Type the IP address or DNS host name of the SMTP server in the SMTP
server field. Use 64 alphanumeric characters or less. It is recommended the IP
address be used.
b. For the E-Mail Addresses fields, type the e-mail addresses of up to five
recipients who should be informed of system events. Use 64 alphanumeric
characters or less for each entry.
2. To enable e-mail transmission to configured addresses, click Enable E-Mail
Event Notification. A check mark displays in the box when transmission is
enabled.
NOTE: The enable function must also be activated for each switch through the Edge Switch
2/32 Product Manager application. E-mail notification can be active for some switches and
inactive for others.
3. Click OK to save the information and close the dialog box.
4. Click the switch icon. The Hardware View page for the selected switch displays.
5. At the Hardware View page for the selected switch, choose Maintenance >
Enable E-Mail Notification. A check mark displays in the check box to indicate
e-mail notification for the switch is enabled, and the menu closes.
edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
2-41
Advertisement
Table of Contents
