Table of Contents
Advertisement
Flexport Upgrade Instructions
Upgrading to 24 Ports
Ports 0 through 15 should already be populated (see
1. Insert 8 new optical transceivers into ports 16 through 23 (see
follows:
a. To install a new SFP transceiver, position one of the SFP transceivers so that
the key is oriented correctly to the port, and insert the transceiver into the port
until it is firmly seated and the latching mechanism clicks.
NOTE: Transceivers are keyed so that they can only be inserted with the correct
orientation. If a transceiver doesn't slide in easily, ensure it is correctly oriented. For
instructions that are specific to the transceiver model, refer to the transceiver
manufacturer's documentation.
b. Repeat
2. If you have no more ports to upgrade, go to
Manager, EWS, or
"Upgrading to 32
1
Figure 3–1: Edge Switch 2/32 port locations
3–2
step a
for the remaining ports.
CLI." If you want to install more ports, continue with
Ports."
2
3–1, 3).
Figure
"Configure Feature Key in Product
1
2
3
3
edge switch 2/32 installation guide
3–1, 2) as
Figure
Ports 24 to 31
Ports 16 to 23
Ports 0 to 15
Advertisement
Table of Contents
