Table of Contents
Advertisement
The Enable Feature Key dialog box displays with a warning, stating that this
action will override the current set of features on the switch. If features are
enabled on the switch, they will be listed in the left column.The list on the right is
a set of features that come with the new feature key. All of the features that are
currently active on the switch are included in the new feature list.
5. Click Activate to activate the new feature key.
An IPL will occur, during which the Ethernet connection between the HAFM
server and switch is momentarily interrupted.
6. Set the switch back online by choosing Set Online State from the Maintenance
menu.
7. When you are finished configuring the switch, you can back up the configuration
data. For more information, refer to the hp StorageWorks edge switch 2/32 product
manager user guide.
NOTE: Be sure to keep the feature entitlement certificate in a secure place.
CAUTION: Performing a configuration reset with HAFM or EWS will reset all
configuration data and non-volatile settings to factory default values. This includes
features keys. Following a configuration reset, feature keys must be reconfigured.
edge switch 2/32 installation guide
Flexport Upgrade Instructions
3–5
Advertisement
Table of Contents
