Table of Contents
Advertisement
Figure 2–23: Configure Ports dialog box (S/390 mode)
a. Click 10-100 km to enable extended distance buffering for a port. A check
mark in the box indicates extended distance operation up to 100 kilometers
(through repeaters) is enabled.
b. Click LIN Alerts to enable or disable LIN alerts for a port. A check mark in
the box indicates alerts are enabled. When the feature is enabled and an
incident occurs on the link, an alert indicator (yellow triangle) displays at the
Hardware View, Port List View, and Port Card View pages, and a message is
sent to configured e-mail recipients. LIN alerts are enabled by default.
c. WWN Binding—Click this check box to display a check mark and enable
WWN binding for the port. This allows only a specific device to attach to the
port. This device is specified by the WWN or nickname entered into the
Bound WWN column. With the check box cleared, any device can attach to
the port even if a WWN or nickname is specified in the Bound WWN
column.
d. Choose a port speed.
edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
2-35
Advertisement
Table of Contents
