Port Properties Dialog Box - HP AA-RSTZB-TE Installation Manual

Installing and Configuring the Edge Switch 2/32
5. Connect the switch-attached fiber-optic cable to the port SFP transceiver.
6. If the switch is managed by an attached HAFM server, go to
managed by the Embedded Web Server interface:
a. Choose View at the left side of the window. The View window opens with the
Switch tab selected and displayed.
b. At the View window, click the Port Properties tab. The Port Properties page
displays with 0 selected, and port information listed for port 0.
c. Choose the port number of the port used to make this ISL connection.
d. Ensure the Operational State field displays Online and the Reason field
displays N/A or is blank. If an ISL segmentation or other problem is indicated,
refer to the hp StorageWorks edge switch 2/32 service manual to isolate the
problem. If no problems are indicated, installation tasks are complete.
7. At the HAFM server's Product View page, double-click the switch icon. The
Hardware View page for the selected switch displays.
8. Double-click the port connector used to make this ISL connection to open the
Port Properties dialog box, as shown in
Figure 2–48: Port Properties dialog box
2-70
step
Figure 2–48.
edge switch 2/32 installation guide
7. If the switch is