Joining An Existing Homeplugav Network - Aztech HomePlug Mediaxtream Ethernet Adapter User Manual

User Manual

Joining an Existing HomePlugAV Network

To enable a new device to join an existing HomePlugAV network, Simple Connect Button
will copy the Private Network Name of the existing network to the HomePlug
Mediaxtream. If you pressed Simple Connect
signal from the first two devices will be processed.
To join an existing HomePlug AV network using Simple Connect:
Step 1
Plug HomePlug Z near a HomePlug
from an existing network. Make sure
you can easily observe
behavior.
Upon connection, HomePlug Z's LEDs
will blink simultaneously and then the
Power LED lights on steadily.
Step 2
Press Simple Connect Button for two
seconds from a HomePlugAV in an
existing network. After you release the
button, the Power LED
the Power LED did not blink, press
Simple Connect Button again for two
seconds.
Note: Note: Do not press Simple Connect for more
Note: Note:
than 2 seconds.
Page 20 of 34
the LED
will blink. If
from multiple HomePlug AVs, only the
BLINKS BLINKS
BLINKS BLINKS