Table of Contents
Advertisement
User Manual
Step 3
Press Simple Connect Button for two
seconds on HomePlug Mediaxtream Z.
After you release the button, the Power
LED
will blink. If the Power LED
did
not blink, press Simple Connect Button
again for two seconds.
Make sure to press Simple Connect
BLINKS
BLINKS
Button on HomePlug Mediaxtream Z
within two minutes after you press
Simple Connect Button from the existing
network.
The Power LEDs on both devices will
continuously blink to signify that they are
searching for another device to pair with.
Note:
Note:
Note:
Note: Do not press Simple Connect for more than
2 seconds.
Step 4
To confirm if the connection was
established, check the LEDs. The Power
LEDs
and the Powerline Activity LEDs
on all devices are ON.
ON
ON
Page 15 of 34
Advertisement
Table of Contents
