Table of Contents
Advertisement
User Manual
If the Powerline Activity LED
on
HomePlug Z is OFF, this means the
pairing was not successful. You need to
repeat the process again.
ON
OFF
Step 5
Unplug HomePlug Mediaxtream Z and then connect it to your Ethernet device using the
Ethernet cables from the product package. After connecting the Ethernet cable, plug
HomePlug Z directly to a wall outlet. An Ethernet-enabled device can be a router,
computer, hub, gaming console, IP phone or network printer.
Note:
Note: HomePlug Mediaxtream work best when connected directly to a wall socket. Avoid plugging it to a
Note:
Note:
power strip or power extension. The other electrical devices in the power strip create noise that may affect
the performance of the HomePlug.
Page 19 of 34
Advertisement
Table of Contents
