Joining An Existing Secured Homeplugav Network - Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor User Manual

User Manual

Joining an Existing Secured HomePlugAV Network

To enable a new device to join an existing network, Simple Connect will copy the Private
Network Name of the existing network to the new HomePlugAV. If you pressed Simple
Connect from multiple HomePlugAVs, only the signal from the first two devices will be
processed.
To join an existing Secured HomePlugAV network using Simple Connect:
Step 1
Plug HomePlugAV Z beside one of your existing HomePlugAV device. Make sure you can
easily observe the LED behavior.
Upon connection, HomePlug Z's LEDs will blink simultaneously and then the Power LED
lights ON steadily.
Step 2
Press Simple Connect for ten seconds from a HomePlugAV Z. After you release the button,
All LED will blink. The Power LED will stay ON.
Note:
If the all LED did not blink, press Simple Connect again for ten seconds.
Page 16 of 42