Table of Contents
Advertisement
User Manual
About the Product
HomePlug Mediaxtream Adapter is ready to use out of the box and does not require the
installation of driver software to work.
It can be connected to computers, routers,
gaming consoles, hubs, and other Ethernet devices regardless of operating system.
How Does It Work?
Aztech HomePlug Mediaxtream Ethernet Adapter utilizes the existing electrical wiring in
the house as a path to create a secured network of computers and Ethernet devices. With
a maximum data rate of up to 1 Gbps, HomePlug Mediaxtream can reliably handle high
requirement applications like broadband Internet, video streaming and Voice over IP.
HomePlug Mediaxtream converts digital signals to a complex analog signal that traverses
along the electrical wires. When receiving the analog signal, it converts the analog signal
back to digital. To make the signal secured, a 128-bit AES encryption is applied.
A HomePlug Mediaxtream device can only communicate with other HomePlug
Mediaxtream and HomePlug AV devices that use the same Private Network Name.
Simple Connect Button automatically creates an encrypted Private Network Name. It can
also be used to reset the Private Network Name or to add a device into an existing
HomePlug AV network.
Note:
Note: HomePlug Mediaxtream devices are already configured to use a common Private Network Name and
Note:
Note:
are ready to use.
When a HomePlug Mediaxtream communicates with another device, the Powerline
Activity LED
color will give you an idea about the connection rate. Green means the
connection rate is below 100Mbps or it is on HomePlug AV mode; and Blue means the
connection rate is more than 100 Mbps or it is on Mediaxtream mode.
Page 4 of 34
Advertisement
Table of Contents
