Aztech HomePlug Mediaxtream Ethernet Adapter User Manual page 7

Label Label Label Label
A
Power Power Power Power
P P P P owerline Activity owerline Activity owerline Activity owerline Activity
B
C Ethernet Activity Ethernet Activity Ethernet Activity Ethernet Activity
D Ethernet Port Ethernet Port Ethernet Port Ethernet Port
E Simple Connect Button Simple Connect Button Simple Connect Button Simple Connect Button
F Reset to Factory Default Reset t Reset t Reset t o Factory Default o Factory Default o Factory Default
Status Status Status Status Description/ Function Description/ Function Description/ Function Description/ Function
Off No power.
•
On After Simple Connect Button is pressed for two
seconds, this LED will blink to confirm the
button press.
•
When Simple Connect Button is pressed for 10
seconds, this LED will blink to confirm the
Private Network Name reset.
Off Device is not connected to a HomePlug or Mediaxtream
network.
•
On This LED remains ON when the device is part of
a HomePlug or Mediaxtream network.
•
The LED color represents the connection rate
within the HomePlug Mediaxtream network
whether it is better
HomePlugAV mode, or best
Mediaxtream mode.
•
The LED flashes to indicate network activity.
Off An Ethernet device is not connected.
•
On An Ethernet device is connected.
•
The LED flashes to indicate Ethernet activity.
Accepts either cross or straight Ethernet cable.
(Best to use Cat5 e Ethernet cable)
•
Press Simple Connect Button for two (2)
seconds to start pairing.
•
Press Simple Connect Button for ten (10)
seconds to release new Private Network Name.
•
Press Simple Connect Button for fifteen (15)
seconds to initialize Standby Mode
•
Press Simple Connect Button for five (5)
seconds to activate the device from Standby
mode.
Press for 3 seconds to reset to the factory default
settings. When you reset to the factory default, all your
configuration changes will be removed.
User Manual
(Green Green) or it is on Green Green
(Blue Blue) or it is on
Blue Blue
Page 7 of 34