User Manual
If the Powerline Activity LED
HomePlug Z is OFF, this means the
pairing was not successful. You need to
repeat the process again.
Step 5
Unplug HomePlug Mediaxtream Z and then connect it to your Ethernet device using the
Ethernet cables from the product package. After connecting the Ethernet cable, plug
HomePlug Z directly to a wall outlet. An Ethernet-enabled device can be a router,
computer, hub, gaming console, IP phone or network printer.
N N N N ote:
ote: HomePlug Mediaxtream work best when connected directly to a wall socket. Avoid plugging it to a
ote:
ote:
power strip or power extension. The other electrical devices in the power strip create noise that may affect
the performance of the HomePlug.
Page 16 of 34
on
ON
OFF