Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start page 24

Easy Start Easy Start Easy Start Easy Start Easy Start
Q2. I'm getting an IP address that starts with 169.254.xxx.xxx
A2. If you are getting this IP address, then you need to check that you are properly connected
to the Cable/DSL Wireless Broadband 4-Port Router.
Confirm that you have a good link light on the Cable/DSL Wireless Broadband 4-Port Router
for the port this computer is connected to. If no, please try another cable.
If you have a good link light, please open up a DOS window as described in A1 and type
"ipconfig/renew" in Window 2000/XP or "ipconfig/renew_all" in Window 98/ME.
If you are still unable to get an IP address from Cable/DSL Wireless Broadband 4-Port Router,
reinstall your network adapter. Please refer to your adapter manual for information on how
to do this.
Q3. I have another IP address displayed
A3. If you have another IP address listed then the PC may not be configured for a DHCP
connection. Please refer to "Step 2: Configure Your Ethernet Network Card" for information.
Once you have confirmed your computer is configured for DHCP , then please follow the steps
below:
i. Open a DOS window as described above.
ii. Type "ipconfig/release" for Window 2000/XP or "ipconfig/release_all" for Window
ME/98
24