Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start page 20

Easy Start Easy Start Easy Start Easy Start Easy Start
B. Shared-key
If multiple clients are connected to the AP with multiple encryption keys. Shared-key
uses Static Keys for encryption which are enter in the Shared Key fields.
key often so as to prevent hacker from cracking the key.
For Encryption in HEXADECIMAL format:
Step 1: Check the
Hexadecimal
a,b,c,d,e,f.
Step 2: You can choose to enter either
bits) or 32 Hex digits
The 152 bits is the most secure, but make sure that the Client card that you are
using supports it.
Step 3: Enter the encryption keys in
For example, the characters
Step 4: Repeat Step 2 and Step 3 for Shared Key 2, 3 and 4.
The SAME
that if you use
For example, if the
the Client
Hence, there will be different Clients connected to the Router with different
encryption keys.
Step 5: Click Apply
20
Hexadecimal Key Entry
format. Hexadecimal characters are: 0,1,2,3,4,5,6,7,8,9 and
(for 152 bits) via the pull down menu.
Hexadecimal
abcde12345
Key must be entered in both the
Key 4 on the
Router has
must also have its
and then click Reboot
box for entering the encryption keys in
10 Hex digits (for 64 bits),
format for Shared Key 1.
are in 10 Hex digits.
Router
Router, you must also use
Key 4 with encryption key as a1b2c3d4e5, then
Key 4 with encryption key as a1b2c3d4e5.
for the setting to take effect.
Change
26 Hex digits
and Client. Please take note
Key 4 on the Client.
your
(for 128