Step 4: Accessing To The Router - Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start

Step 4:
i From your Internet Browser, key in http://10.0.0.1 at the address bar and hit
<Enter>.
ii The Overall Status
iii Click Quick Configuration.
iv Please choose one of the following methods accordingly.
Method 1: Enable
will obtain an IP address from an upstream DHCP Server or Cable Modem.
Method 2: Enable
Modem. Key in your username and password provided by your Internet Service
Provider (ISP).
Method 3: Enable
your administrator or Internet Ser vice Provider for more information.
v Always click
Accessing To The Router
will be displayed.
DHCP Client option if you are using a cable modem. The WAN port
ADSL Modem / PPPoE Connection
Static IP option if you are using Static IP connection. Check with
Apply and then click Reboot for the setting to take effect.
Easy Start Easy Start Easy Start Easy Start Easy Start
option if you are using ADSL
17