Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start page 10

Easy Start Easy Start Easy Start Easy Start Easy Start
D. Connect to an Existing Network (AP Mode)
With the Auto MDI/MDIX feature, both cross and straight UTP cable can be utilized.
Step 1:Connect the computer to the LAN port of the Cable/DSL Wireless Router. Refer to
the section on
notebook" follow by
Browser".
Step 2:Access the Router. Refer to the section on
Step 3:Under Configuration, click LAN.
Untick "Enable DHCP
Click Apply.
Under Configurations, click NAT.
Untick "EnableNAT?"
Click Apply.
Click Reboot
Step 4:Connect Existing Network via an Ethernet Cable to the Lan port of the Cable/DSL
Wireless Router.
Step 5:The Cable/DSL Wireless Router is in AP Mode now. The default SSID is 11G and
the default channel is 11. You may need to release and renew to get the IP address
form the Existing Network.
Step 6:You are now connected to your Existing Network.
This type of connection is for those who wish to extent their Existing Network but do
not want the Cable/DSL Wireless rouer in router mode.
10
To LAN Port
Cable/DSL
Wireless
Router
"Connecting the Cable/DSL Wireless Router to your Computer/
"Configuring Your Ethernet Card"
Server?".
for setting to take effect.
To LAN Port
and
"Accessing To The
Computers or
Notebooks with
Ethernet Network
Cards
Computers or
Notebooks with
Wireless PC Cards
or USB Client
"Configuring Your Internet
Router".