Step 2: Configuring Your Ethernet Network Card/Wireless Client - Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start

Easy Start Easy Start Easy Start Easy Start Easy Start
Step 2: Configuring Your Ethernet Network Card/
2.1 Configuring Your Ethernet Network Card/ Wireless
Client
The following illustrated screen shots serve only as examples. For
any dissimilarities, please follow closely the instructions prompted on
your Computer.
The below setup is also similar for Wireless Client setup but for exact
configuration, please refer to the respective Wireless client
documentation.
2.2 For Windows
i From your Windows desktop, right-click on the
Properties.
iiii From the Configuration
Ethernet Card that is connected to your CABLE/DSL Wireless Router.
Click Properties.
iii
Click the option
automatically
Ensure that your CABLE/DSL Wireless Router is powered on. Restart your
system.
Proceed to Step
14
Wireless Client
98 Second Edition / Windows
®
tab, select TCP/IP-> xxx
Click the IP Address
Obtain an IP address
and click OK to save the
settings.
3.
Network Neighborhood
where xxx
(This screen shot uses 3Com EtherLink
Ethernet card model as an example).
tab.
Me
®
icon. Select
refers to the model of your