Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start page 21

For Encryption in ASCII format:
Step 1: Uncheck the
format. Ascii characters are: 0,1,2,...8,9 and a,b,c,d,...x,y,z.
Step 2: You can choose to enter either
bits) or 16 Ascii keys
The 152 bits is the most secure, but make sure that the Client card that you are
using supports it.
Step 3: Enter the encryption keys in
For example, the characters
Step 4: Repeat Step 2 and Step 3 for Shared Key 2, 3 and 4.
The SAME
that if you use
For example, if the
Client
the
Hence, there will be different Clients connected to the Router with different
encryption keys.
Apply
Step 5: Click
Hexadecimal Key Entry
(for 152 bits) via the pull down menu.
Ascii
2w3e4
Key must be entered in both the
Key 4 on the Router, you must also use
Router has
must also have its
Reboot
and then click
box for entering the encryption keys in
5 Ascii keys (for 64 bits),
format.
are 5 Ascii keys.
Router
Key 4 with encryption key as 5abc2, then
Key 4 with encryption key as 5abc2.
for the setting to take effect.
Easy Start Easy Start Easy Start Easy Start Easy Start
13 Ascii keys
and Client. Please take note
Key 4 on the Client.
Ascii
(for 128
21