Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start page 25

iii. Then type "ipconfig/renew"
Once you are able to get a valid IP address from Cable/DSL Wireless Broadband 4-Port
Router then you can now access the web-based management pages.
If you still are not getting an IP address from Cable/DSL Wireless Broadband 4-Port Router,
please reset the hardware reset to factory default mode and then follow the above steps
again.
© Copyright June 2004. All Rights Reserved.
P/N: 040-311316-111 (Ref:NA8300)
Easy Start Easy Start Easy Start Easy Start Easy Start
25