Step 5: Wireless Configuration - Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start

Easy Start Easy Start Easy Start Easy Start Easy Start
Step 5:
i SSID: This name allows PCs to connect to the correct Wireless Access Point when
multiple Access Points (or Wireless Routers) operate in the same location.
ii Channel: The radio channel number.
iii Hide SSID: When this is Checked, the router will not broadcast the
unwelcome PCs will not be able to scan for the
iv Turbo Mode: When this mode is enabled, the router would communicate with the
CardBus at 108Mbps
Cardbus. In Turbo mode, all the devices automatically use
i Security Mode:
ii Authentication: There are
do not support Shared-key. Hence, use Open-system for simple management.
18
Wireless Configuration
instead of 54Mbps. Turbo mode must also be
Check the box to enable the Encryption and Authentication features.
Open-system
Enter the valid channels for this router.
SSID of this router.
and Shared-key. However, some Client cards
SSID
Enabled on the
Channel 6.
and