For Windows - Aztech ADSL 4 Port Ethernet Router Easy Start

Easy Start Easy Start Easy Start Easy Start Easy Start
2.2

For Windows

i Windows® 2000:
a) From your Windows desktop, right-click on the icon
select Properties.
b) At the
Connection
Windows® XP:
(Instructions are based on default Start menu option)
a) From your Windows desktop, click
Communications
b) Right-click on the
Ethernet Network Card that is connected to the ADSL Router and click
Properties.
ii Ensure that the field
that is connected to your ADSL Router.
(This is important especially if you have more than one
at the Network and Dial-up Connections
selected the correct one.)
Select Internet Protocol (TCP/IP)
iii Select the option
address automatically
Click
10
2000 / Windows
®
Network and Dial-up Connections
icon and select Properties.
> Network
Local Area Connection
Connect Using
Obtain an IP
and click OK.
OK again to close.
Proceed to Step
®
window, right-click on the
Start > All Programs
Connections.
icon that reflects the model of your
indicates the model of your Ethernet Network Card
Local Area Connection
/ Network Connections
and click Properties.
(This screen shot uses 3Com EtherLink
Ethernet card model as an example).
3.
XP
My Network Places
Local Area
> Accessories
icons displayed
window. Ensure that you have
and
>