Step 4: Connecting To The Internet - Aztech ADSL 4 Port Ethernet Router Easy Start

Easy Start Easy Start Easy Start Easy Start Easy Start
Step 4:
i From your Internet Browser, key in http://startmodem/ (or http://192.168.1.1/) at the
Address bar and hit <Enter>.
ii An ADSL Web Management interface will be launched. This Web Interface allows you
to get connected to the Internet as well as providing the administrative rights to
configure your Router's behaviour.
To get connected with the default connection profile, on the Quick Start page, enter
your username and password as given by your ADSL Service Provider and click
Connect.
Dial On Demand: To enable, click on the box (a tick will appear indicating that the
selection is enabled) and click Connect. You will see 'Dial-On Demand enabled -
waiting for traffic' on the Quick Start page. Internet connection will automatically be
initiated when the ADSL Router detects outgoing traffic from your computer, that is,
when you entered an address at your Web Browser.
Disconnect when idle for ( )
You may enter a value in which the Internet connection will disconnect automatically
when there is no activity detected after the indicated idle time. (You may also click
'Disconnect' button at the Status page to end the Internet connection immediately).
Upon successful verification and authentication, you will be connected to the Internet.
Click Status from the ADSL Web Management to view your connection status.
12
Connecting to the Internet
mins: Applicable only when Dial On Demand is enabled.