Aztech ADSL 4 Port Ethernet Router Easy Start page 14

Easy Start Easy Start Easy Start Easy Start Easy Start
•
For PPPoA routed / PPPoE routed:
The PPP Authorization's
VPI and VCI values
User Name
Password
Auto DNS (Enable/Disable)
•
The Encapsulation method
(By default, the Encapsulation method
unless specified by your ADSL Service Provider).
•
The addresses for
LAN IP address
LAN Subnet Mask
Remote Gateway
•
To enable or disable
i Power on your computer/notebook.
ii Launch your Web Browser. On the Address bar, key in your new LAN IP address if
you have changed it. Otherwise the default is http://192.168.1.1 (or http://startmodem)
and hit <Enter>.
iii From the ADSL Web Management page, click
iv Click Create a new
v
Select the required
vi Fill in the entries with the above information.
vii Click Configure
viii Click Save config. Follow the instructions prompted to save the changes permanently.
Close your Browser to exit ADSL Web Management.
14
___________________
___________________
___________________
___________________
___________________
used in IPoA is LLC SNAP. Do not change this setting
___________________
___________________
___________________
NAT __________________
service.
ATM protocol and click Configure.
© Copyright December 2002. All Rights Reserved.
P/N: 040-511487-101 (Ref:1100)
(default is 192.168.1.1)
(default is 255.255.255.0)
(default is 192.168.1.1)
(default is enabled)
Expert Mode > WAN Connections.